ITC-100HP1K

This ITC-100 System Combo from Datavideo is an intercom system for up to eight users. It includes the ITC-100 unit, four ITC-100SL beltpack units, four HP1 Headsets, four 65′ cables, and a tally light set. The whole package is designed to facilitate two-way communication—between you and your stage-crew, for example (should you be, for instance, a director).

Facebook
WhatsApp
Twitter
Email

Descripción

The base station features all call and mute buttons, a mic input, built-in speaker, and standard headphone jacks.

  • ITC-100 8-User Wired Intercom System with 4 Beltbacks & 4 Headsets

    One of the innovative features of the rack-mountable ITC-100 8-User Wired Intercom System with 4 Beltbacks & 4 Headsets from Datavideo is that it can use headsets ranging from low-cost cell phone headsets to high-quality professional units.

    Up to 8 users can be connected to the ITC-100 via PTT wired beltpacks. Four beltpacks, four headsets, four cables and a tally light set are all included. Cables for connecting the beltpacks may be up to 984 ft long, and use 5-pin XLR connectors. The base station features all call and mute buttons, a mic input, built-in speaker, and standard headphone jacks.

    Supports up to 8 wired users
    Uses your choice of headsets, from low-cost cell phone sets to high-quality professional units
    Use cables up to 984 ft to connect beltpacks
    UPC: 672255001684
  • HP1 Single-Ear Headset for ITC Intercom Systems

    The Datavideo HP1 Single-Ear Headset is compatible with Datavideo ITC Intercom Systems. It features a closed-back design to reduce outside noise, a soft circumaural earpad and a noise-cancelling microphone. The headphone speaker resists clipping during loud monitoring.

    UPC: 672255003862
  • ITC-100SL Beltpack for ITC-100 Intercom System

    The ITC-100SL is a replacement/expansion wired beltpack receiver for use with the ITC-100 intercom system from Datavideo. The ITC-100 includes 4 ITC-100SL beltpacks, but can support up to 4 additional units to support 8 total users.

    One of the key features of the ITC-100SL is that it has a standard 3.5mm headphone jack so that you may use any headset you choose, ranging from inexpensive cell-phone sets all the way up to expensive professional models. It also has a 2.5mm jack for Motorola earphones. Other features of the ITC-100SL include call and talk buttons, volume control, a tally light, and a 5-pin XLR connector for talkback, power, and a tally indicator.

    Metal Housing
    3.5mm Jack for Wide Headset Compatibility
    2.5mm Jack for Motorola Earphones
    Tally Indicator Connection
    Talk and Call Buttons
    Volume Control
    Connects to Base Station Via 5-pin XLR for Power and Communication
    • ITC-100 8-User Wired Intercom System with 4 Beltbacks & 4 Headsets
    • Frequency Response 550Hz – 3.6kHz < ±3dB
      Total Harmonic Distortion (THD) < 3%
      Signal to Noise Ratio > 50dB
      Operating Range Up to 660′ (200 m) Between Base Station and Slave
      Connectors 1 x 12V 1.5A Power Input
      2 x 15-Pin Sub D Tally Connectors
      1 x 3.5mm Stereo Headphone/Mic Combo Jack
      1 x 1/4″ Stereo Headphone Jack
      1 x 3-Pin XLR Light Socket
      1 x XLR/TRS Combo Mic Input
      Speaker 2.75 x 1.2″ (70 x 30mm) (3W, 32 Ohms)
      Operating Temperature 41 to 104° (5 to 40°C)
      Dimensions 1RU
      Weight 4.2 lbs (1.9kg)
      Packaging Info
      Box Dimensions (LxWxH) 20.5 x 15.0 x 8.5″
    • HP1 Single-Ear Headset for ITC Intercom Systems
      Connectors
      Connector Type 1 x 1/8″ audio/microphone connector
      Headphones
      Transducer Type Single-ear, dynamic
      Form Factor Closed-back
      Frequency Response 10 Hz to 22 kHz
      Nominal Impedance 24Ω
      Nominal Output Level 98 dB @ 1 kHz
      THD < 0.2% @ 1 kHz, 100 mW
      Power Rating Nominal Power @ 1 kHz: 100 mW
      Microphone
      Transducer Type Condenser
      Frequency Response 20 Hz to 16 kHz
      Polar Pattern Omni-Directional
      Nominal Impedance 2.2kΩ
      Sensitivity -64 dB
      Packaging Info
      Box Dimensions (LxWxH) 12.2 x 8.3 x 4.5″
    • ITC-100SL Beltpack for ITC-100 Intercom System
      Input Connections 1 x 5-pin XLR
      Output Connections 1 x 5-pin XLR
      1 x 3.5mm Jack
      1 x 2.5mm Jack
      Dimensions 4.5 x 3.75 x 1.4″ (114 x 95 x 35mm)
      Weight 12.3 oz (350 g)
      Packaging Info
      Box Dimensions (LxWxH) 7.5 x 7.2 x 7.1″